Gates - General

Brompton Joinery have been supplying and fitting gates across the Fylde coast and beyond for over 20yrs, from a simple front gate to large bespoke entrance gates to any specification.

Beginning with a customer’s initial sketch of what they require, to the fitting of the final product we can take care of everything. We offer a free measuring service and will provide you with an estimate of cost either supply only or supply and fit.

Our gates are manufactured from top quality hardwoods and softwoods and we only use galvanised fittings (excludes locks) to ensure a long life span.

We stock or make garden gates; wooden gates; driveway gates; timber gates; gate hinges; farm gates; field gates; oak gates; hardwood gates; entrance gates; gate posts.


1

Rear veiw of heavy gates showing galvanised fittings used.

Double gate fitted to very windy location framework upgraded to 4"x3"(100mmx75mm) very substantial construction.

New brick wall ready for gate to be fitted.

Set of gates for very windy location.Due to size required it was decided to leave semi open top to allow some of the weather to pass though.

Internal view of gates

A set of soft wood gates with mortice lock and finished in high quality varnish at customers request.

Due to the width of driveway and extra panelling is was necessary to concrete in two heavy duty posts prior to commencing rest of work.

Double gates with band and gudgeon hinges plus panelling to left hand side finished in brown preservative.

Heavy duty fully framed 4" x 3" (100mm x 75mm) gates with galvanised fittings now completed.

Old gates in need of replacing, removed and disposed of by ourselves.

With the old gates removed a new frame is fitted ready for new gates.

With the pressure treated posts installed these will be left for three days prior to installation of fencing and gates.

Set of double gates treated with medium brown preservative complete with close board fencing.

Double gate fitted to very windy location framework upgraded to 4"x3"(100mmx75mm) very substantial construction.

Front veiw of supply only softwood drive gates.

One of two matching dutch farm gates fitted by ourselves.

New gate now fitted and given base coat of preservative.

Instalation by ourselves, the customer required a door replacing on the garage with a timber panel and personal door, they also had 7`x5` shed.

Fully framed gate supplied and fitted by ourselves.

Awaiting more details

Large softwood gates supply only.

Arched top gates in softwood finished in a medium brown preservative.

Rear veiw of supply only set of gates we manufacture to your sizes and specification.

Rear veiw of framed all round soft wood gate made to suit new brick opening

A set of old gates that will be taken down and diposed of as part of our complete service.

gate no2 of two matching drive gates now treated with high quality preservative(we only supply base coat of high quality wood preservative customers can then chose finishing coats)

Heavy duty gates featured mortice deadlock.

Set of double gates finished in brown preservative.

Softwood swept top gates .

Strong double gates, would with stand harsh weather conditions, i.e.coastal areas, Cleveleys, Fleetwood, Lytham, St Annes

Before installation

Palisade wooden gates fitted Preston

Large wooden gates

Heavy duty framed gates Preston

Paled top Double Gates

none

We provided a panel complete with door for car port

none

none



Hardwood double drive gates Paled top

Heavy duty framed gates Preston Rear

Set of double gates delivered and fitted by ourselves. Hinges used are heavy duty band and gudgeon for maximum strength